電動卷簾門開關便利，性能高，是現在車庫，門店、車間等地方經常安裝的門類產品，但是也有用戶反映說，該門一旦上鎖后，卷簾門經常失靈，嚴重影響了卷簾門開關，那么大家知道濟南卷簾門上鎖后該怎么辦嗎?接下來我們一起來看看吧!

The electric Roller shutter is easy to open and close, with high safety performance. It is now a door product often installed in garages, stores, workshops and other places. But some users said that once the door is locked, the Roller shutter often fails, seriously affecting the opening and closing of the Roller shutter. Do you know what to do after the Roller shutter is locked in Jinan? Let's take a look together next!

有用戶在售后信息中舉報卷簾門損壞，因為卷簾門不動，按遙控器的停止鍵沒有反應!一般情況下，電動卷簾門由遙控器鎖定，只需按下停止按鈕即可。由于用戶報修說按停止鍵沒有反應。

A user reported that the Roller shutter was damaged in the after-sales information, because the Roller shutter did not move, pressing the stop button on the remote control did not respond! In general, the electric Roller shutter is locked by the remote control, and only needs to press the stop button. Due to a user complaint that pressing the stop button did not respond.

電動卷簾門為什么鎖著?

Why is the electric Roller shutter locked?

大多數情況下，遙控器面板上的按鈕有上下鍵、停止施工鍵和鎖鍵。一般是用戶誤按了鎖鍵，導致卷簾門上下失靈，卷簾門被鎖住。當然，除了誤操作，還有卷簾門本身的故障。

In most cases, the buttons on the remote control panel have up and down keys, stop construction keys, and lock keys. Generally, the user presses the lock key by mistake, which causes the Roller shutter to fail up and down and the Roller shutter to be locked. Of course, in addition to misoperation, there is also the fault of the Roller shutter itself.

由于用戶誤操作，卷簾門被鎖定。一般我們可以按【停止鍵】解鎖。

The Roller shutter is locked due to the user's misoperation. Generally, we can press the [Stop] button to unlock.

在異常情況下，卷簾門被鎖定，可參考以下操作將其解鎖：

Under abnormal circumstances, the Roller shutter is locked. Please refer to the following operations to unlock it:

打開電動卷簾門上方的檢修口，然后找鏈條慢慢拉。入口通常位于右上角。簡單的嘗試就是切斷電源。通電后，遙控鎖將自動釋放。

Open the access door above the electric Roller shutter, and then pull the chain slowly. The entrance is usually located in the upper right corner. The simple attempt is to cut off the power supply. After power is applied, the remote control lock will automatically release.

電動卷簾門遙控操作說明：

Remote control operation instructions of electric Roller shutter:

卷簾門遙控器的使用其實很簡單，總是用四個鍵操作：

In fact, the remote control of Roller shutter is very simple to use. It is always operated with four keys:

開門(遙控器向上箭頭或向上箭頭);

Open the door (up arrow or up arrow on the remote control);

關門(向下箭頭或遙控向下鍵);

Close the door (down arrow or remote down key);

停止(停止箭頭(或遙控停止鍵);

Stop (stop arrow (or remote stop button);

鎖定鍵按下遙控器的鎖定鍵鎖定電機，遙控器的其他功能鍵將無效，電機無法控制，按停止鍵解鎖。

Lock key Press the Lock key of the remote control to lock the motor. Other function keys of the remote control will be invalid and the motor cannot be controlled. Press the stop key to unlock.

如果濟南電動卷簾門出現故障后，可以先嘗試切斷電源，如果切斷電源還是解決不了，建議大家可以快點保修，讓的安裝維修師傅來幫助，這樣可以快速的解決問題。更多相關內容或者需求就來我們網站http://www.verycq.cn咨詢看看吧！

If the Jinan electric Roller shutter fails, you can try to cut off the power first. If you can't cut off the power supply, we suggest that you can repair it quickly and let professional installation and maintenance technicians help you, so that you can quickly solve the problem. Come to our website for more relevant content or requirements http://www.verycq.cn Consult and take a look!